Disabling the XBell in Reflection X Advantage
Technical Note 2347
Last Reviewed 20-Feb-2014
Applies To
Reflection X Advantage

Reflection X Advantage responds to an X client's XBell request. This technical note demonstrates how to disable the bell on the X client using a host command.

Note: For information about disabling XBell in Reflection X versions 12.0 through 14.x, see Technical Note 1780.

Disabling the XBell

You can disable the bell on the X client by running the following command at a host prompt: xset b 0 0 0. You must run this command each time you run the X client in order to disable the bell.

This behavior can also be automated by adding the xset b 0 0 0 command to your Reflection X Advantage connection template.

Edit the Startup Command Line

Follow the steps below to automate disabling the XBell.

This method can be used with all connection methods.

  1. In the Reflection X Manager, select the X client definition you want to use. If you are creating a new definition, ensure that the command field is completed.
  2. In the Application drop-down, select Multiple Commands.
  3. Ensure that the pre-existing command has a space and ampersand at the end. For example:

/usr/openwin/bin/xterm -fn 6x13 -sb -ls -display %IP#% -name %T% &

Note: The commands provided with Reflection X Advantage will typically include this syntax already.

  1. Click the add icon (the green plus sign) to add a new command row.
  1. In the new Command row, enter the xset b 0 0 0 command, followed by an ampersand (&).

Syntax: /<path>/xset b 0 0 0 -display %IP#% &

Example: /usr/openwin/bin/xset b 0 0 0 -display %IP#% &

Note: The "0"s are zeros.

View Full Size

The new command line code is automatically saved to this X client session.

Related Technical Notes
1780 Disabling the XBell in Reflection X

Did this technical note answer your question?


Need further help? For technical support, please contact Support.